3D explained in 3 minutes !

What means 3D printing ?

3D printing consists of using a printer to create 3D objects.

The printer.

Let’s start with the printer. Multiple technologies exist, but at our level, we will use FDM printers (Fused Deposition Modeling): we deposit layers of molten plastic. The plastic is melted by a mobile head which layer after layer makes our 3D model “appear”. See our guide for the most popular models.

The plastic.

The plastic? Mostly PLA (although ABS and PETG are quite common). It’s easy to work with and very affordable: about 20€/kg. To give you an idea, the SRT box, which is a very substantial project, requires about 1.3kg of plastic, or about 26€. See our guide to different PLAs.

One of the many affordable PLA offerings found on Amazon.

The 3D files.

You can design 3D files to print yourself, using software like Freecad (free), SolidWords, Fusion360. It is a long learning process. However with time you will be able to draw more and more complex parts, faster and faster. For the record, I started 3D drafting with this simple engineering advice, “draw your parts as you would have machined them.”

With a little experience, it doesn’t take more than a minute to draw a plate with a hole in M5 and another in M6.

You can also directly download files to print (the 3D equivalent of .pdf). The most common formats are .stl or .obj, on sites like Thingiverse, Cults3D…Some files are free, others are not. In my experience, you will always find a free project for what you are looking for. STL is not an editable format, you will have a lot of trouble to modify the dimensions.

There are endless exciting projects on Thingiverse!

The Slicer: the software that sends 3D files to the printer!

Once you have your file, you need to use a “slicer”, which is the software that will allow you to convert the 3D file specifically for your printer (a bit like the driver of a 3D printer). I recommend using Cura. In particular, we will determine the printing direction (which side will be in contact with the printer’s plate) and what the fill rate will be. Indeed, most printed parts will be almost hollow, which makes 3D printing particularly economical.

 

Cura allows you to preview the print with the supports.

The file is then transferred from the slicer to the 3D printer (by cable, SD card, wifi, etc.), and off you go. 3D printers often require adjustments and maintenance. For example, you need to make sure that the platen is perfectly flat in relation to the nozzle.

As a general rule, the more expensive the printer, the less frequent the need to make adjustments.

We finally have our 3D object that “appears” in front of our eyes!

I've been passionate about cars since I was a kid! I learned the multiple variations of the Skyline R34 through the Gran Tursimo series, until I discovered GTR2 at the wheel of a keyboard. A few years later, I plunged back into Sim Racing with a G27 which made me enter the DIY world. Always looking for an immersion out of reach in reality, I develop projects that I take care to make accessible to any 3D printer owner!
Posts created 134

Leave a Reply

Your email address will not be published.

Related Posts

Begin typing your search term above and press enter to search. Press ESC to cancel.

Back To Top